RANSAC shape areas

For any question about plugins!
Post Reply
geolux
Posts: 43
Joined: Thu Sep 03, 2015 5:06 pm

RANSAC shape areas

Post by geolux »

Hi guys
I'm testing CC "from Points cloud to BIM procedure"
So I need to detect the shapes from wall or roofs. In this sample CC detected so good the plane of the roof but it is a rectangle and not follow the contours of the original shape of the roof. Is it directly possible to get a irregular shape and not a rectangle shape? Or, how can I cut the calculated shape along the contours of the roof?
Thank you
Attachments
shape.JPG
shape.JPG (32 KiB) Viewed 2476 times
roof.JPG
roof.JPG (77.72 KiB) Viewed 2476 times
daniel
Site Admin
Posts: 7332
Joined: Wed Oct 13, 2010 7:34 am
Location: Grenoble, France
Contact:

Re: RANSAC shape areas

Post by daniel »

If you want the contour you should try to fit a 'Facet' instead of a plane (the 'max edge length parameter - if not null - will enable the extraction of the concave hull). You'll have to play with this parameter to get a good result, but if it's too big the contour will not follow the shape close enough, and if it's too small the contour will follow the cloud noise / irregular sampling and you'll get a "noisy" contour).
Daniel, CloudCompare admin
Post Reply